The tax horsepower or taxable horsepower was an early system by which taxation rates for automobiles were reckoned in some European countries such as Britain, Belgium, Germany, France and Italy; some US states like Illinois charged license plate purchase and renewal fees for passenger automobiles based on taxable horsepower. The tax horsepower rating was computed not from actual engine power but by a mathematical formula based on cylinder dimensions. At the beginning of the twentieth century, tax power was reasonably close to real power; as the internal combustion engine developed, real power became larger than nominal taxable power by a factor of ten or more.

Britain

The so-called RAC horsepower rating was devised in 1910 by the RAC at the invitation of the British government. The formula is:

Tax horsepower

where: is the diameter (or bore) of the cylinder in inches, is the number of cylinders

Tax horsepower

The formula was calculated from total piston surface area (i.e., "bore" only). The factor of 2.5 accounts for characteristics that were widely seen in engines at the time, such as a mean effective pressure in the cylinder of and a maximum piston speed of .

Tax horsepower

The system introduced a somewhat progressive way of taxing higher-value cars more than low-cost ones but was also introduced to protect the domestic British motor industry from foreign imports, especially the Ford Model T. Henry Ford's mass production methods meant that the Model T was competitively priced with British-built cars despite being a much larger, more durable and more powerful car than other available similarly-priced models. In 1912 Ford opened a factory to build Model Ts in Manchester, to circumvent the import tariffs that, up to that point, had increased the effective price of foreign cars. Under the RAC's formula the Model T was a 22 'tax horsepower' car, making it more expensive to run than its British-built rivals on sale for the same price.

At first the RAC rating was usually representative of the car's actual (brake) horsepower, but as engine design and technology progressed in the 1920s and 1930s these two figures began to diverge, with engines making much more power than their RAC ratings suggested: by 1924 the engine of the Austin Seven (named for its 7 hp rating) produced 10.5 brake horsepower, 50 percent more than its official rating.

It became common for the name of a model to include both its RAC tax horsepower and its actual power output, such as the Wolseley 14/60 and the Alvis 12/70 of 1938.

To minimise tax ratings British designers developed engines with very long stroke and low piston surface area. Another effect was the multiplicity of models: Sevens, Eights, Nines, Tens, Elevens, Twelves, Fourteens, Sixteens etc. each to fit with a taxation class. Larger more lightly stressed engines may have been equally economical to run and, in less variety, produced much more economically. The system discouraged manufacturers from switching to more fuel-efficient overhead valve engines as these generally required larger bores, while the established sidevalve layout could easily use very narrow bores. Despite OHV engines having significant benefits in economy, refinement and performance, the RAC system made these engines more expensive to own because it placed them in a higher tax class than sidevalve engines of identical power output. Despite this, by 1948 the Standard Flying Twelve, a typical mid-size saloon, produced from a engine, nearly four times as much horsepower as the RAC system suggested.

While the RAC system had protected the home market from the import of large-engined low-priced mass-produced American cars, the need for roomy generously proportioned cars for export was now paramount and the British government abandoned the tax horsepower system with effect from 1 January 1947 replacing it at first with a tax on cubic capacity, which was in turn replaced by a flat tax applying from 1 January 1948. However British cars and cars in other countries applying the same approach to automobile taxation continued to feature long, relatively narrow cylinders even in the 1950s and 1960s, partly because limited investment meant that new car models often had new bodies but their engines were carried over from earlier generations.