To use this scale, first fix the micrometer, Fig. 8. Plate II. A, to the body of the microscope; then fit the sectoral scale, Fig. 7, in the stage, and adjust the microscope to its proper focus or distance from the scale, which is to be moved till the base appears in the middle of the field of view; then bring the needle point g, Fig. 8, by turning the screw L, to touch one of the lines c a exactly at the point answering to 20 on the sectoral scale. The index a of the micrometer, Fig. 8, is to be set to the first division, and that on the dial plate to 20, which is both the beginning and end of its divisions; we are then prepared to find the magnifying power of every magnifier in the compound microscope which we are using.
EXAMPLE. Every thing being prepared agreeable to the foregoing directions, suppose you are desirous of ascertaining the magnifying power of the lens marked No. 4; turn the micrometer screw, until the point of the needle has passed over the magnified image of the tenth part of one inch; then the division, where the two indices remain, will shew how many revolutions, and parts of a revolution, the screw has made, while the needle point traversed the magnified image of the one-tenth of an inch; suppose the result to be twenty-six revolutions of the screw, and fourteen parts of another revolution, this is equal to 26 multiplied by 20, added to 14; that is, 534 thousandth parts of an inch.
The twenty-six divisions found on the strait scale of the micrometer, while the point of the needle passed over the magnified image of one-tenth part of an inch, were multiplied by 20, because the circular plate C D, Fig. 8, is divided into twenty equal parts; this produced 520; then adding the fourteen parts of the next revolution, we obtain 534 thousandth parts of an inch, or 5-tenths and 34-hundredth parts of another tenth, which is the measure of the magnified image of 1-tenth of an inch, at the aperture of the eye glasses, or at their foci. Now if we suppose the focus of the two eye-glasses to be one inch, the double thereof is two inches; or if we reckon in the thousandth part of an inch, we have two thousand parts for the distance of the eye from the needle point of the micrometer. Again, if we take the distance of the image from the object at the stage at six inches, or six thousandths, and add thereto two thousand, double the distance of the focus of the eye glass, we shall have eight thousand parts of an inch for the distance of the eye from the object; and as from the proposition, page 51, we gather that the glasses double the image, we must double the number 534 found upon the micrometer, which then makes 1068: then, by the following analogy, we shall obtain the number of times the microscope magnifies the diameter of the object; say, as 240, the distance of the eye from the image of the object, is to 800, the distance of the eye from the object, so is 1068, double the measure found on the micrometer, to 3563, or the number of times the microscope magnifies the diameter of the object. By working in this manner, the magnifying power of each lens used with the compound microscope may be easily found, though the result will be different in different compound microscopes, varying, according to the combination of the lenses, their distance from the object, and one another, &c.