Mixed oxidant solution is a type of disinfectant which is used for disinfecting, sterilization and eliminating pathogenic microorganisms in water and in many other applications. Using a mixed oxidant solution for water disinfection, compared to other methods, may have various benefits such as higher disinfecting power, stable residual chlorine in water, improved taste and smell, elimination of biofilm, and safety. A mixed-oxidant solution is produced by electrolysis of sodium chloride and is a mixture of disinfecting compounds. The main component of this product is chlorine and its derivatives (ClO−, HClO and Cl2 solution). It may also contain high amounts of chlorine dioxide solution, dissolved ozone, hydrogen peroxide, and oxygen, from which the name "mixed oxidant" is derived.
Performance
Reactions
Mixed oxidant solution is produced by on-site electrolysis. The concentration of disinfectant output is proportional to the concentration of salt input, voltage, temperature, current, and electrolysis time. A mixed-oxidant solution production system contains corrosion-resistant electrodes or dimensionally-stable anodes (DSA) and is made so that different voltages for electrolysis are applied simultaneously to different parts. In this way, different reactions occur at the anode and cathode poles, and therefore, various oxidizing substances are produced.
In this process, the chloride ions at the anode are converted to chlorine gas. After reducing the concentration of chloride ions, in the presence of ClO− and Cl2 compounds in the solution and applying the required conditions, ClO2 is produced and the final solution is stored.
For generating ozone, the conditions for water electrolysis reactions must be provided. In this case, the following half reactions take place (which is given below), Hydrogen gas is produced at the cathode and oxygen gas at the anode. By increasing the voltage, the anode half reaction is changed and ozone is produced.
These phenomena can be affected by other principles and applied conditions in electrolysis. In this process and during the production of ozone, a highly penetrating smell of ozone within the region of the reactor outlet is clear. By continuing this process and maintaining stable conditions, production of ozone can be continued up to the maximum dissolution of ozone in water. The solubility of ozone in 20˚C water is 570 mg per liter and 1050 mg per liter in water at 0˚C. In the next stage, with little change in reaction conditions, hydrogen peroxide is produced.. For producing ozone and hydrogen peroxide, there are different half reactions with different levels of reduction potential and in practice, each of them may occur.
Imposing various conditions, including changes in voltage, current, concentration, pH, temperature, flow, and pressure will relatively change the standard reduction potential and as a result, the tendency of reactions of various substances. However, the extent of the electrodes in the reactor, creating multiple layers of electrolyte and unequal conditions on the electrodes surfaces, will cause major changes in the standard modes of the half reactions.
Production Cell
The basis of the mixed-oxidants production cell is electrolysis of a water solution of sodium chloride. In the process anions and cations move toward the anode and cathode, respectively, and related reactions are carried out. For producing a mixed oxidants solution, different types of electrolysis cells such as a membrane cell or a standard contact cell (unipolar and bipolar) are used.
Membrane cell
This cell consists of anode and cathode electrodes with an ion exchange membrane between them. This membrane lets cations pass through it and leads them to the cathode. This cell has two inputs and two outputs for water. One pair of input and output is located at the cathode side and the other pair is located at the anode side.
There are membrane cells with different membrane models. In some of them an ion exchange membrane is used which is able to move the cations and anions from one side to the other side. In this type of cell, brine solution enters from one side and water from the other side.
The half reaction in the cathode chamber is as follows:
2NaCl + 2H2O + 2e−→ 2NaOH + 2Cl−+ H2
On the anode side, part of the chloride ions are oxidized and dissolved in the passing water in the forms of Cl2, HOCl and small amounts of ClO2 due to the electrolysis of water. Small amounts of ozone and oxygen gas are produced at the anode side. The main half reaction at the anode side is: