The APC (Advanced Personal Computer) was a series of business microcomputers released outside of Japan by the NEC Corporation. The series comprised the APC, the APC II and APC III, international versions of models from the Japanese NEC N5200 series.
The 8086-based N5200, released in 1981, was the first computer to use the NEC µPD7220 High-Performance Graphics Display Controller.
The better-known PC-9800 series, released a year later by the different division, had a similar architecture to the original N5200 and used many of the same components. The most significant differences between the two were that the PC-9801 had slightly lower vertical screen resolution, graphics were standard instead of optional (still using a second µPD7220) and it used 5.25" floppy drives instead of 8".
The APC IV, despite sharing the series name, was an ordinary IBM PC/AT compatible and not compatible with the earlier APC models.
N5200
The N5200 is a series of personal computers released in 1981. The APC is a version of the N5200 that was sold outside Japan.
Although its computer architecture is very similar to the PC-98, it was developed and marketed in a different way. At that time, NEC was a vertical integrated company as seen in other big Japanese companies, and intended to open new business. The management allowed a few divisions to start a new computer business, so each divisions developed own computer systems for different markets. The N5200 was marketed as a personal computer which could be used as both a standalone computer and a computer terminal for ACOS mainframe platforms. It was developed by the Terminal Units Division who developed computer terminals for mainframes, but the PC-98 was developed by the Small Systems Division who developed standalone enterprise systems. The position of the N5200 is similar to IBM 3270 PC, but there is significant difference that the N5200 didn't offer the PC-98 compatibility instead it had own software library.
As of 1982, both CP/M-86 and MS-DOS lacked task switching and an ISAM support, so NEC developed a proprietary operating system for the N5200, called PTOS. PTOS was ported to the PC-98 in the early 1990s, and the N5200 computer line was absorbed.
APC
The first APC was released in 1982 at for a single-floppy monochrome system or for a dual-floppy color system. It used a 16-bit NEC μPD 8086 CPU with 128K of RAM (expandable to 256K), 8K of ROM, and 4K of battery-backed CMOS RAM, a clock/calendar chip, parallel printer and RS-232 serial interfaces, and one or two built-in 8" floppy diskette drives supporting both single-sided single-density (243 KB) and double-sided double-density (1 MB) formats. (An external 10 MB hard disk drive was also available.) The detachable keyboard had 86 keys (including the numeric keypad) and an additional 22 function keys.
Display
A built-in 12" monochrome or 8-colour display was driven by an NEC µPD7220 display controller generating an 80 column by 25 line character display. (An additional line at the top of the screen displayed status information.) Each character was displayed in an 8×19 dot cell (giving 640×475 screen resolution) and could be one of 250 predefined 7×11 glyphs from ROM or 256 user-defined 8×16 glyphs from RAM. Each character cell also had an attribute byte indicating the colour (or, for monochrome screens, whether it was highlighted or not) and any mix of reverse video, blinking, over-bar, under-bar and blanked (not displayed).
The optional graphics board adds a second µPD7220 graphics controller with up to 512K memory displaying 640×494 graphics that overlay the text screen output. (This is higher than the resolution of the user-addressable text screen because graphics can overlay the status line as well.) The graphics controller allows panning the screen over the display memory, zooming, independent scrolling of different screen areas and other graphics functions. A light pen can be used for input.
Software
Operating systems included CP/M-86 and MS-DOS.
APC III
The APC III (Advanced Personal Computer) was released by NEC in 1984. An update on the NEC APC II, which replaced the original NEC APC, all the NEC APC models utilized the Intel 8086 processor, unlike the IBM PC and clones.
The unit was physically smaller than an IBM-PC. The compact case included two 5" half-height disks (two floppies or one floppy and one hard disk), and space for standard options (hard disk controller, additional video memory). Special options (including additional system memory) required using expansion slots, of which four were available.